Before starting the wireless setup you will need your wireless passphrase/security key. You can locate this information on bottom of your cable modem. It will be labeled as WPA-PSK or Passphrase, and is case sensitive.
▼ Xbox 360
Step 1: Press the Guide button (the grey X button in the middle) on the controller.
Step 2: Select "Settings", then "System Settings", then "Network Settings".
Step 3: Select your wireless network name (SSID) from the list of available wireless networks.
Step 4: Enter your wireless security key or password.
▼ Xbox One
Step 1: While at the main screen, press the menu button on the Xbox One controller.
Step 2: From this menu select Settings.
Step 3: Once in the settings screen, select the option for "Network".
Step 4: On the left side of the screen please select "Setup wireless network".
Step 5: Select the name of your wireless network.
Step 6: Enter in your wireless passphrase / security key.
Note: On the Xbox One controller, you can identify the menu button by looking for the one that has 3 horizontal lines on it and is located near the middle of the controller.
▼ PlayStation 3
Step 1: In the XMBT home menu, go to Settings, Network Settings,
Step 2: Scroll down to Internet Connection Settings and press the X button. When prompted, "Do you want to continue?", select Yes. On the next screen, select Wireless as your connection method and press the X button.
Step 3: Pick Scan and press the X button.
Step 4: From the list, pick your SSID and press the X button. On the next screen, press right on the directional pad to continue - do NOT press the X button to Edit.
Step 5: Pick your WLAN Security Setting (either WEP or WPA-PSK/WPA2-PSK). If none, pick None and skip the next step. Press the X button.
Step 6: If you selected a Security Setting, enter your security key with the keyboard. Press the Start button to exit the onscreen keyboard. Press right on the directional pad to proceed to the next screen.
Step 7: The system will check your network configuration settings and display the information. Press the X button to save these settings.
Step 8: Test the connection on the next screen. Press the X button to start the test.
Step 9: When the test is complete (usually less than a minute), it will display the results ("Succeeded" or "Failed"). If you have successfully connected to your network, congratulations, you have completed the network setup process. If not, go back through and double check your steps.
▼ PlayStation 4
Step 1: From the main PlayStation 4 menu navigate to "Settings" and press X on the PlayStation 4 controller.
Step 2: Navigate down to the "Network" option and press X on the PlayStation 4 controller.
Step 3: Navigate to the "Set Up Internet Connection" option and press X on the PlayStation 4 controller.
Step 4: Select "Use Wi-Fi" option and press X on the PlayStation 4 controller.
Step 5: On the next screen select "Easy" by pressing X on the PlayStation 4 controller.
Step 6: Navigate to your network name from the list and press X on the PlayStation 4 controller.
Step 7: Enter in your wireless passphrase/wireless key and press R2 on the PlayStation 4 controller. On the next screen select "Ok" by pressing X on the PlayStation 4 controller.
The next screen will say "Checking network environment" followed up with a screen displaying that the Internet settings are updated. At this screen you can perform an internet connection test by pressing X on the PlayStation 4 controller. Once this test is complete you can now use your PlayStation 4 online through the Wi-Fi connection.
▼ Nintendo Wii
Step 1: From the Wii Main Menu select the Wii icon in the bottom left of the screen.
Step 2: Select "Wii Settings".
Step 3: Press the arrow on the right of the screen and locate the "Internet" option.
Step 4: Select "Internet", then "Connection Settings".
Step 5: Select an open connection slot. An open slot will say "None". If there isn't an open slot, one of the existing slots will need to be cleared. This can be done by selecting Connection 1, 2, or 3 and selecting "Clear Settings" on the next page.
Step 6: Choose "Wireless Connection" then select "Search for an Access Point".
Step 7: Select your wireless network name (SSID) from the list of available wireless networks.
Step 8: Enter your wireless security key or password.
Step 9: Select "OK" and save the settings.
▼ Wii U
Step 1: From the main Wii U menu go to "System Settings" and press A on the Wii U controller.
Step 2: Navigate down to the "Internet" option and press A on the Wii U controller.
Step 3: On the next screen select "Connect to the Internet" by pressing A on the Wii U controller.
Step 4: Navigate to your network name and press A on the Wii U controller.
Step 5: Use the on screen keyboard to type in your wireless passphrase/security key and press "OK" once you are finished.
The next screen will display the Wii U connection test. Once the test is finished successfully press "OK" on the screen. The next screen will ask if you would like to set this as your default connection and then perform a system update, which indicates a successful internet connection!